Screw Air Compressor Series - S

Product Details:

Boge Screw Air Compressor -S (22Kw - 250Kw)

Intelligent design advantage:

The award winning BOGE S series design incorporates a clever cabinet layout with a high quality fi nish and maximum effi ciency. Every component part incorporates the decade long know-how of our engineers – advantages paid back through reliable daily operation.

EFFICIENCY:

The specially designed BOGE airend provides high output volumes at low energy consumption – for reliable and energy effi cient compressed air supply.

VALVE-LESS OIL CIRCUIT:

The BOGE screw compressor is designed with a valve-less oil circuit eliminating the need for oil stop or check valves. This function provides maximum operating safety.

DECOUPLED UNIT:

A sub-frame mounted on vibration damping feet prevents transmission of structure borne sound. A rigid basic frame allows easy transportation by lift truck or stacker truck.

INTERNAL PIPEWORK:

All oil carrying pipes are made of steel terminating with high quality precision threaded joints that are leak proof and safe even under the highest pressures. The entire machine utilises only one hose on the clean air side which also serves for vibration damping.

CONTROL:

The BOGE FOCUS control is the standard compressor control and provides numerous control and monitoring features.

EXEMPLARY DESIGN - ECONOMIC INN OPERATION

• DIN & VDE switch cabinet, protection type IP 54
  - clear layout and dirt repellent
• Internal layout clearly defined into three sections
  - easy access to all components
• No need for oil stop valve or check valve in valve-less oil circuit-high reliability
• Super-silencing fitted as standard to the air inlet
  - pleasant sound level, easy to upgrade to complete super-silencing
• BOGE control, regulating and monitoring system
  - individual, adaptable, economic, reliable
• Small warm air section, complete autonomous cooler unit
  - compressor operates even when the cabinet is open for testing or maintenance purposes
• Dynamic, intrinsically safe intake controller
  - Designed as standard for proportional control
• Torsionally rigid sealed base frame
  - Easy to transport with a pallet truck or forklift truck
• Vibration damped sub-frame
  - reduced transmission of structure-borne sound
• Nylon laminated fibre mat acoustic lining
  - very good soundproofing, oil-repellent, washable
• Compact V-belt guard and housing protects belts from ingress of dust and dirt
  - long service life of V-belts.
• Patented GM drive system with constant belt tension
  - maintenance-free V-belt drive
• Horizontal combi separator
  - fast de-aeration and low foam properties
  - low residual oil content of only 1-3 mg/m3 in every operating phase 

The S series has been awarded the iF seal for outstanding design quality in the industrial products category by the 'Industrie Forum Design'. It is Germany’s most important design award for industrially manufactured products.
The international jury made up of acknowledged design experts assesses not only the quality of design, but also criteria which benefit users of the machine, for example:

• Engineering and choice of materials
• Degree of innovation
• Ergonomics and functionality
• Safety
• Environmental compatibility
• Service life
• Efficient use of resources and energy
• Operating convenience

EFFECTIVE FAD: 137 - 1441CFM
PRESSURE RANGE: 8 - 13Bar

Product Details:

Air Compressor -Sl (200Kw - 355Kw)

Larger Volumes Of Compressed Air:

The SL series screw compressors are designed for reliability and effi ciency when producing large volumes of compressed air.

The SL series of screw compressors are direct coupled - therefore transmission losses are virtually eliminated.
The SL series is a logical extension of the range to complement the

S series and utilises the standard modular build system:

• Airend
• BOGE control and monitoring system

The increased output and significantly lower power used by the drive motor allows the SL series to operate economically, even at reduced pressure.
The SL series offers all the options offered in the S series and is therefore flexible enough to adjust to individual operating conditions.

• Direct coupled airend
  - The most economical way to produce compressed air
• BOGE control, regulating and monitoring system
  - customised, adaptable, economical, reliable
• Divided into three clearly defined sections
  - easy access to all components
• BOGE airend with state-of-the-art optimum performance screw profile
  - small specific power requirement, greater economy
• Dynamic, fail-safe intake controller
  - designed for proportional regulation as standard
• Small warm air section, complete autonomous cooling unit
  - compressor can also operate with the cabinet open for testing or maintenance purposes
• Soundproofed lining in robust, nylon laminated mineral fibre mat
  - very good soundproofing, oil repellent, washable
• Valve-less oil circuit with no oil-stop valve and no check valve
  - high reliability
• Vibration damped base and sub-frame
  - reduced transmission of structure-borne sound
• Torsionally rigid, sealed, base frame
  - for easy transport with a pallet truck or forklift truck
• Horizontally mounted combi-tank, multiple oil pre-separation, fast de-aeration and low foam formation
  - low residual oil content of only 1-3 mg/m3 in every operating phase
• DIN and VDE switch cabinets, protected to IP 54
  - clearly laid out and protected against ingress of dust and dirt
• Three-phase ISO class F asynchronous motor
  - additional motor reserves for difficult operating conditions, long service life due to position in the cold air intake area, as well as thermistor protection

Effective Fad: 1166 – 1544 Cfm
Pressure Range: 8 – 13 Bar

Product Details:

Air Compressor-Sd (30Kw - 150Kw With Integrated Air Dryer)

THIS IS HOW COMPACT COMPRESSED AIR CAN BE:

Standard S series components along with a refrigerant dryer are assembled into one standalone package reducing footprint size and eliminating installation costs. Flexibility doesn’t end there: a dryer bypass is provided in the scope of delivery that allows for direct connection of the compressor to the compressed air network.

The specially designed BOGE airend provides high output volumes at low energy consumption – for reliable and energy effi cient compressed air supply.

The standard S series screw compressors form the basis of these complete ‘ready-to-use’ compressed air stations. A +3°C refrigerant dryer (DIN ISO 7183) is simply dropped into the top of the compressor package and fully piped and wired.

Combining the compressor and the dryer provides a space-saving solution eliminating the traditional dryer installation cost. If necessary, the compressor can be operated without the dryer, by utilising a simple by-pass that is supplied in the system. A loss free electronically operated level controlled condensate drain is fitted as standard.Operating controls and monitoring indication are clearly laid-out on the compressor’s control panel.

• Space saving compact design
  - no additional space requirement and no additional installation costs for the dryer
• Dryer module is simply dropped into the top of the compressor package
  - fast and easy access
• Cyclone separator with condensate drain fitted before the dryer as standard
  - bulk condensate eliminated before dryer
• Dryer fitted with electronically operated, level-controlled condensate drain as standard
  - loss free removal of condensate
• High availability of the compressor
  - in the event of a dryer malfunction a simple bypass ensures continual availability of the compressor

A cyclone separator with electronically operated level controlled condensate drain is installed as standard before the dryer in order to remove condensate that is formed in the aftercooler.

The capacity of the dryer is therefore utilised fully for drying the compressed air. The loss free electronic condensate drain is a standard feature of the compressed air station and removes any further condensate from the drying process.The dryers operating controls and monitoring indications are clearly laid out on the compressors control panel.

REFRIGERANT DRYERS:

The frame mounted refrigerant dryer has a pressure dew point of +3°C (DIN ISO 7183) and simply drops into the top of the screw compressor cabinet enabling simple maintenance or removal if ever necessary.

CYCLONE SEPARATOR:

A cyclone separator with electronic loss free condensate drain is positioned before the dryer to remove any condensate before it enters the dryer.

INTERNAL PIPEWORK:

All oil carrying pipes are made of steel terminating with high quality precision threaded joints that are leak proof and safe even under the highest pressures. The entire machine utilises only one hose on the clean air side which also serves for vibration damping.

OPERATOR PANEL AND CONTROL:

The dryer controls are clearly visible on the compressor control panel. The BOGE FOCUS control which offers numerous monitoring and control features, comes as standard.

EFFECTIVE FAD: 183 - 650CFM
PRESSURE RANGE: 8 - 13Bar